Tech Ridge Roofing
Roofer replacing fasteners on a large R-panel metal roof
Commercial · Manor, TX & Central Texas

Commercial Metal Roofing in Manor, TX

Standing seam and R-panel for shops, warehouses, churches and ag buildings.

Commercial metal roofing in Manor and the greater Austin area: standing seam and R-panel roofs for shops, warehouses, churches, retail and agricultural buildings, metal-over-metal and metal-over-flat retrofits, and repair of rusted fasteners, lifted laps and leaking penetrations on existing metal roofs.

Call (512) 557-3313 Request a Free Inspection
Overview

What Commercial Metal Roofing Includes

Most of the shops, warehouses, barns and church buildings along 290, 130 and the county roads east of Austin have metal roofs, and most of them are exposed-fastener R-panel that is somewhere between fifteen and thirty years old. The panels are usually fine. The neoprene washers on the screws are not: they dry out, the screws back out, and the roof leaks at a thousand small points. We repair those roofs by replacing fasteners with oversize screws and new washers, resealing laps and penetrations, and replacing damaged panels, which buys years at a fraction of a new roof.

When a metal roof is done, or a flat roof needs to become a metal one, we install new standing seam or R-panel systems, including metal-over-metal retrofits on sub-purlins that avoid tearing off the old roof and metal-over-flat retrofits that give a low-slope building real drainage. Panel gauge, coating and insulation are chosen for the building and the budget, and work is sequenced so your operation keeps running.

  • Standing seam metal roofs for commercial and ag buildings
  • R-panel and PBR-panel roofs
  • Metal-over-metal retrofit on sub-purlins
  • Metal-over-flat retrofit with slope-build framing
  • Fastener replacement with oversize screws and new washers
  • Lap, ridge and penetration resealing
  • Panel replacement for hail, wind and rust damage
  • Insulation and underlayment options for conditioned buildings
Warning signs

Signs You Need Commercial Metal Roofing

  • Rust streaks running down from every screw
  • Leaks at laps, ridge or around roof penetrations
  • Panels lifting at the eave after wind
  • A flat roof you are tired of patching
  • An older metal roof you want to keep rather than replace
How it works

Our Commercial Metal Roofing Process

01

Assess the Existing Roof

Panel type, fastener condition, purlin spacing, laps, penetrations and whether the deck or framing can carry a retrofit.

02

Scope and Panel Choice

Standing seam or R-panel, gauge and coating, insulation and underlayment, all listed with a price before work starts.

03

Install Around Operations

Sections sequenced so your shop or warehouse keeps running, with penetrations flashed and the site cleaned daily.

Pricing

What Affects the Cost of Commercial Metal Roofing

You get the price before the work starts. These are the things that move it:

  • Roof size and pitch
  • Standing seam versus exposed-fastener panel
  • Panel gauge and coating
  • Retrofit over the existing roof versus tear-off
  • Insulation, skylights and penetrations
  • Working around operations and access
FAQ

Commercial Metal Roofing FAQs

Can you put a new metal roof over my old one?

Often, yes. A metal-over-metal retrofit installs sub-purlins over the existing panels and a new roof on top, with no tear-off, and the building stays dry throughout. We check the framing and the local code requirements first.

Standing seam or R-panel for a shop?

R-panel costs less and is fine for most shops, barns and warehouses if the fasteners are maintained. Standing seam has no exposed screws, lasts longer, and makes sense on buildings you plan to keep for decades or that are conditioned.

Do you repair hail dents on commercial metal?

Cosmetic dents do not leak, and many commercial policies exclude them. Split or punctured panels do leak and are replaced. We document both honestly so your claim is clean.

Commercial

Related Services

Commercial RoofingFlat and low-slope roofs for shops, offices, retail and warehouses.TPO RoofingSingle-ply membrane for flat and low-slope roofs, commercial and residential.Flat Roof RepairSeams, drains, ponding and flashings on low-slope roofs, homes and small commercial.Commercial Roof InspectionA written condition report with cores, photos and options, per building.
Service Area

Commercial Metal Roofing Across Central Texas

Pick a direction, then your town, for what this work looks like on the roofs there.

Call (512) 557-3313
Manor and the east side

Manor, Pflugerville, Hutto, Elgin and Bastrop County

Home base. Fast-growing subdivisions on Blackland Prairie clay, builder-grade roofs from the 2005 to 2022 boom, and the busiest hail corridor in the region.

Need roofing outside these towns? Call and ask; we can usually get there.

Call (512) 557-3313 →
Get in touch

Ready for a Free Roof Inspection?

Call, or send the details and we'll get back to you to set up a time.

Tech Ridge Roofing

Locally owned and working across Central Texas, from Williamson County and the east side to the Hill Country.

Call or text
Free inspections and estimates
Email
Email us
We reply the same business day
Service area
Central Texas
Manor, greater Austin and the Hill Country
Hours
Mon to Sat: 7:00 AM to 7:00 PM
Sunday: Closed
How we work
  • Free inspection with photos, no obligation
  • Written scope and price before any work starts
  • No deductible waivers; Texas HB 2102 followed
  • Locally owned in Manor, not a storm chaser

Your contact info is only used to get back to you about this request. For an active leak, call; it's faster.