Roofing Company in Bertram, TX

Bertram replacements are mostly metal: taking off worn tin or R-panel on a ranch house and installing new standing seam over high-temperature underlayment, or replacing the panels on a barn with new R-panel. On the newer shingle homes along Highway 29 it is a standard replacement done to spec.

Shingle roofing in Bertram is re-roofing older homes in town and replacing the newer roofs on the subdivisions off 29, with a Class 4 shingle, proper underlayment and ventilation.

Bertram has been a metal-roof town since the railroad, and a lot of what we do here is replacing tin and first-generation R-panel that has finally worn out. Standing seam on the ranch house, new R-panel on the barns and sheds, and re-screws on the buildings that are not ready for replacement yet.

New construction around Bertram is ranch homes, barns and shops. We do dry-in and finish, mostly in metal.

On a Bertram ranch a free inspection is usually four or five roofs, not one: the house, the shop, the hay barn, the equipment shed. We walk each, note which ones are fasteners-only and which are panel replacements, and give you one report that ranks them so you can budget.

The typical Bertram repair is a re-screw on exposed-fastener metal, a rusted valley or chimney flashing on an older home, or ridge caps gone after wind. We repair what will hold and are straight with you when a roof is more patch than roof.

Bertram leaks are old metal and old shingle: rusted fasteners, lifted laps, worn valleys. We trace the leak, repair it, and are honest about whether the roof has years left.

Bertram is on the western edge of the Williamson County hail track, and storms that hit Liberty Hill and Leander usually crossed Bertram first. On working ranches that means barns and equipment sheds get hit along with the house. We document every building for your carrier, tarp what is open, and repair or replace to the approved scope.

Wind damage in Bertram is laps and ridge caps lifted on metal barns and shops, and shingles gone off exposed roofs in the subdivisions off 29. We re-fasten, replace and document.

Bertram emergencies are storms coming across open ranch land: panels and ridge caps lifted on metal, a barn roof opened up, an old tin roof finally letting go. We secure what is open, stop the water, photograph it for your carrier, and repair on a written price.

Bertram takes Hill Country hail and wind on open ranch land. We document honestly, meet the adjuster, and explain cosmetic dent exclusions on metal roofs plainly.

Flat and low-slope roofs for shops, offices, retail and warehouses.

• TPO and single-ply membrane installation and replacement
• Flat roof repair: seams, drains, curbs, penetrations and ponding areas
• Metal roof retrofit for commercial and ag buildings
• Modified bitumen and built-up roof repair

Single-ply membrane for flat and low-slope roofs, commercial and residential.

• New TPO installation on flat and low-slope roofs
• TPO replacement, including wet insulation removal
• TPO repair: seams, flashings, drains and punctures
• Low-slope sections on homes: porches, additions and flat roofs

Seams, drains, ponding and flashings on low-slope roofs, homes and small commercial.

• TPO, modified bitumen, EPDM and built-up roof repair
• Seam repair and rewelding
• Drain, scupper and gutter flashing repair
• Ponding area correction

Commercial metal roofing in Bertram is ranch and ag buildings and shops in town: fastener and lap repair on older R-panel and new metal roofs.

A written condition report with cores, photos and options, per building.

• Roof walk with photo mapping of every defect
• Core samples for wet insulation, patched afterward
• Drain, scupper and gutter check
• Seam, flashing, curb and parapet condition